ES-2048 User’s Guide
Chapter 31 Introducing Commands 231
<port-list>
path-cost <1-
65535>
Sets the STP path cost for a
specified port.
13
<port-list>
priority <0-255>
Sets the priority for a specified
port.
13
help
Displays help information. 13
hostname <name_string>
Sets the switch’s name for
identification purposes.
13
time <Hour:Min:Sec>
Sets the time in hour, minute and
second format.
13
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly known as
GMT) and your time zone.
13
date <month/day/
year>
Sets the date in year, month and
day format.
13
help
Displays help information. 13
timesync <daytime|time|nt
p>
Sets the time server protocol. 13
server <ip>
Sets the IP address of your time
server.
13
loginPrece
dence
<LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the switch
should use (first) to authenticate a
user.
14
bcp-
transparen
cy
Enables Bridge Control Protocol
(BCP) transparency.
13
queue priority <0-7>
level <0-7>
Sets the priority level-to-physical
queue mapping.
13
storm-
control
Enables broadcast storm control
on the switch.
13
bandwidth-
control
Enables bandwidth control. 13
mac-aging-
time
<10-3000>
Sets learned MAC aging time. 13
snmp-
server
get-community
<property>
Sets the get community. 13
set-community
<property>
Sets the set community. 13
trap-community
<property>
Sets the trap community. 13
trap-destination
<ip>
Sets the IP addresses of up to
four stations to send your SNMP
traps to.
13
Table 73 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
