ES-2048 User’s Guide
Chapter 31 Introducing Commands 239
Table 76 mvr Commands
COMMAND DESCRIPTION PRIVILEGE
mvr <1-
4094>
Enters the MVR (Multicast VLAN
Registration) configuration mode.
13
source-port
<port-list>
Sets the source port(s).
An MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
receiver-port
<port-list>
Sets the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
inactive
Disables MVR settings. 13
mode
<dynamic|compati
ble>
Sets the MVR mode (dynamic or
compatible).
13
name <name-str>
Sets the MVR name for
identification purposes.
13
tagged <port-
list>
Sets the port(s) to tag VLAN tags. 13
group <name-str>
start-address
<ip> end-address
<ip>
Sets the multicast group range for
the MVR.
13
exit
Exist from the MVR configuration
mode.
13
8021p-priority
<0-7>
Sets a priority level (0-7) to which
the switch changes the priority in
outgoing IGMP control packets.
13
no source-port
<port-list>
Disables the source port(s).
An MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
no receiver-port
<port-list>
Disables the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
no tagged <port-
list>
Sets the port(s) to untag VLAN
tags.
13
no inactive
Enables MVR. 13
no group
Disables all MVR group settings. 13
no group <name-
str>
Disables the specified MVR group
setting.
13
