A SERVICE OF

logo

ES-2048 User’s Guide
Chapter 32 User and Enable Mode Commands 241
CHAPTER 32
User and Enable Mode
Commands
This chapter describes some commands which you can perform in the User and Enable modes.
32.1 Overview
The following command examples show how you can use User and Enable modes to diagnose
and manage your switch.
32.2 show Commands
These are the commonly used show commands.
32.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
sysname# show system-info
System Name : ES-2048
System Contact :
System Location :
Ethernet Address : 00:13:49:ae:fb:59
ZyNOS F/W Version : V3.70(AID.0)b1 | 7/10/2006
RomRasSize : 2467078
System up Time : 0:05:09 (7904 ticks)
Bootbase Version : V0.6 | 03/06/2006
ZyNOS CODE : RAS Jul 10 2006 08:40:31
Product Model : ES-2048