ES-2048 User’s Guide
Chapter 31 Introducing Commands 237
31.11.5 config-vlan Commands
The following table lists the vlan commands in configuration mode.
help
Displays a description of the
interface port-channel commands.
13
exit
Exits from the interface port-
channel command mode.
13
intrusion-lock
Enables intrusion lock on a port
and a port cannot be connected
again after you disconnected the
cable.
13
test
Performs an interface loopback
test.
13
protocol-based-
vlan name
<name>
ethernet-type
<ethernet-type>
vlan <vid>
priority <0-7>
Creates a protocol based VLAN
with the specified parameters.
13
inactive
Disables the protocol based VLAN. 13
weight <wt1>
<wt2> ... <wt8>
Sets a weight value of one to eight
to each variable from wt 1 to wt 8.
13
ge-spq
<q0|q1|q3|q4|q5
|q6|q7>
Sets the interface to use SPQ on
the gigabit ports starting with the
specified queue.
13
Table 74 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 75 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan <1-
4094>
Creates a new VLAN group. 13
name <name-str>
Specifies a name for identification
purposes.
13
normal <port-
list>
Specifies the port(s) to dynamically
join this VLAN group using GVRP
13
fixed <port-
list>
Specifies the port(s) to be a
permanent member of this VLAN
group.
13
forbidden <port-
list>
Specifies the port(s) you want to
prohibit from joining this VLAN
group.
13
untagged <port-
list>
Specifies the port(s) you don’t want
to tag all outgoing frames
transmitted with this VLAN Group
ID.
13
