ES-2048 User’s Guide
Chapter 31 Introducing Commands 235
cir
Enables the guaranteed bandwidth
limits for incoming traffic on the
port(s).
13
cir <Kbps>
Sets the guaranteed bandwidth
allowed for incoming traffic on the
port(s).
13
pir
Enables bandwidth limits allowed
for incoming traffic on the port(s).
13
pir <Kbps>
Sets the maximum bandwidth
allowed for incoming traffic on the
port(s).
13
egress
Enables bandwidth limits allowed
for outgoing traffic on the port(s).
13
egress <Kbps>
Sets the maximum bandwidth
allowed for outgoing traffic on the
port(s).
13
broadcast-limit
Enables broadcast storm control
limit on the switch.
13
<pkt/s>
Sets how many broadcast packets
the interface receives per second.
13
multicast-limit
Enables the interface multicast
limit.
13
<pkt/s>
Sets how many multicast packets
the interface receives per second.
13
dlf-limit
Enables the Destination Lookup
Failure (DLF) limit.
13
<pkt/s>
Sets the interface DLF limit in
packets per second (pps).
13
diffserv
Enables DiffServ on the port(s). 13
qos priority <0 .. 7>
Sets the quality of service priority
for an interface.
13
mirror
Enables port mirroring in the
interface.
13
dir
<ingress|egress
|both>
Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
13
speed-duplex <auto|10-
half|10-
full|100-
half|100-
full|1000-full>
Sets the duplex mode (half or
full) and speed (10, 100 or
1000 Mbps) of the connection on
the interface. Selecting
auto
(auto-negotiation) makes one port
able to negotiate with a peer
automatically to obtain the
connection speed and duplex
mode that both ends support.
13
Table 74 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
