ES-2048 User’s Guide
Chapter 31 Introducing Commands 233
31.11.4 interface port-channel Commands
The following table lists the interface port-channel commands in configuration mode.
Use these commands to configure the ports.
ssh known-hosts
<host-ip>
<1024|ssh-
rsa|ssh-dsa>
<key>
Adds a remote host to which the
switch can access using SSH
service.
13
https cert-
regeneration
<rsa|dsa>
Re-generates a certificate. 13
timeout <0-
65535>
Sets the HTTPS timeout period. 13
multi-
login
Enables multi-login. 14
mvr <vlan-
id>
Enters the MVR (Multicast VLAN
Registration) configuration mode.
See Section 31.11.6 on page 238
for more information.
13
dhcp-relay
Enables DHCP relay. 13
helper-address
<svr_ip>
[svr2_ip]
[svr3_ip]
Sets the IP addresses of up to 3
DHCP servers.
13
option
Allows the switch to add DHCP
relay agent information.
13
information
Allows the switch to add system
name to agent information.
13
diffserv
Enables DiffServ on the switch. 13
dscp <0-63> priority <0-7>
Maps DSCP value with an 802.1p
value.
13
Table 73 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 74 interface port-channel Commands
COMMAND DESCRIPTION PRIVILEGE
interface
port-
channel
<port-
list>
Enables a port or a list of ports for
configuration.
13
weight <wt1>
<wt2> ... <wt8>
Sets the interface to use WFQ
weighting. A weight value of one to
eight is given to each variable from
wt 1 to wt 8.
13
