A SERVICE OF

logo

Open as PDF
next previous
Chapter 6 Tutorials
EMG1302-R10A User’s Guide
43
3 Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the
EMG1302-R10A’s WPS Station screen within two minutes.
The EMG1302-R10A authenticates the wireless client and sends the proper configuration settings to
the wireless client. This may take up to two minutes. Then the wireless client is able to
communicate with the EMG1302-R10A securely.
The following figure shows you the example to set up wireless network and security on EMG1302-
R10A and wireless client (ex. in this example) by using PIN method.
Figure 23 Example WPS Process: PIN Method
6.3 Configure Wireless Security without WPS
This example shows you how to configure wireless security settings with the following parameters
on your EMG1302-R10A.
Follow the steps below to configure the wireless settings on your EMG1302-R10A.
WITHIN 2 MINUTES
Wireless Client
Access Point
SSID SSID_Example
Channel 6
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)