Chapter 7 WAN
EMG1302-R10A User’s Guide
71
7.6 IPv6 Screen
Use this section to enable and configure IPv6 addresses. By using IPv6, you are able to receive
services such as: quality of service (QoS), end-to-end security, and globally unique addresses.
Figure 34 Configuration > Network > WAN > IPv6
The following table describes the labels in this screen.
Table 18 Configuration > Network > WAN > IPv6
LABEL DESCRIPTION
IPv6 Setup
IPv6 Select a field to Enable or Disable the IPv6 standard.
IPv6 Connection Select the IPv6 connection type: Static IPv6, DHCPv6, PPoE, or 6rd.
IPv6
IPv6 Address Enter the IPv6 address specified in heaxadecimal using 16-bit values between colons.
Subnet Prefix
Length
Enter the subnet prefix variable, a decimal value to define how many of the high-order
contiguous bits of the address are the prefix.
Default Gateway Enter the specified gateway to set as default for the IPv6 connection type.
DHCPv6
DNC Setting
• Click Obtain DNS server address automatically if you do not know your
DNS server IP address(es)
.
• If you know your DNS server IP address(es), click Use the following DNS
server addresses, and type them in the Primary DNS server and
Secondary DNS server fields.
PPPoE
