![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/0/77/0778b821-7b5d-448b-a85a-c04bd0014122/0778b821-7b5d-448b-a85a-c04bd0014122-bg49.png)
EMG1302-R10A User’s Guide 73
CHAPTER 8
Wireless LAN
8.1 Overview
This chapter discusses how to configure the wireless network settings in your EMG1302-R10A. See
the appendices for more detailed information about wireless networks.
The following figure provides an example of a wireless network.
Figure 35 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are
called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your EMG1302-R10A is the AP.
8.2 What You Can Do
•Use the General screen to enter the SSID, select the channel, and configure wireless security
(Section 8.4 on page 76).
•Use the More AP screen to enable and configure multiple wireless networks (Section 8.6 on page
81)
•Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the EMG1302-R10A (Section 8.7 on page 83).
•Use the Advanced screen to allow intra-BSS network and set the RTS/CTS Threshold (Section
8.8 on page 84).