Prestige 201 ISDN Access Router
10-4 Backup, Restore and Upload
Example Using Walusoft TFTP Client
Figure 10-4 TFTP Example
10.2 Restore Configuration
Option 6 from Menu 24 – System Maintenance allows you to restore the current workstation backup
configuration to your Prestige.
10.2.1 Restore using the Console Port
You can restore the configuration either through an FTP or TFTP client program (preferred method) or
through the RS-232 console port (in the event of the network being down). Restoring via the console port
under normal conditions is not recommended since FTP or TFTP is faster.
Enter the path and name of the
firmware file (*.bin extension) or
configuration file (*.rom
extension) on your computer.
This is the filename on the
Prestige. The filename for the
firmware is “ras-m” and for the
configuration file is “rom-spt”.
Press “Send” to upload /restore
the file to the Prestige and “Fetch”
to back up the file on your
computer. Transfer the file in
binary mode.
Enter the IP address of the
Prestige.
