Prestige 201 ISDN Access Router
Internet Access 3-5
Follow the instructions in the following table on how to configure the DHCP fields.
Table 3-1 DHCP Ethernet Setup Menu Fields
Field Description Example
DHCP Setup
DHCP= This field enables/disables the DHCP server. If it is set to
Server, your Prestige will act as a DHCP server. If set to None,
the DHCP server will be disabled. If set to Relay, the Prestige
acts as a surrogate DHCP server and relays requests and
responses between the remote server and the clients.
When DHCP is used, the following four items need to be set:
None
Server (default)
Relay
Client IP Pool
This field specifies the first of the contiguous addresses in the IP
address pool.
192.168.1.33
Size of Client IP
This field specifies the size, or count, of the IP address pool. 32
Primary DNS
Server
Secondary
DNS Server
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
Remote DHCP
Server
If Relay is selected in the DHCP= field above, then enter the IP
address of the actual, remote DHCP server here.
