Prestige 201 ISDN Access Router
Remote Node Configuration 4-3
Table 4-1 Remote Node Profile Menu Fields
Field Description Options
Outgoing: My Login
Name
This is a required field. Enter the login name for your
Prestige when it calls this remote node.
Outgoing: My
Password
This is a required field . Enter the password for your
Prestige when it calls this remote node.
This field sets the authentication protocol used for
outgoing calls. Options for this field are:
l CHAP/PAP - Your Prestige will accept either
CHAP or PAP when requested by this remote
node.
CHAP/PAP
l CHAP - accept CHAP only. CHAP
Outgoing: Authen
l PAP - accept PAP only. PAP
Outgoing: Pri(mary)
Sec(ondary)
Phone
Numbers
Your Prestige always calls this remote node using the
Primary Phone number first for a dial-up line.
If the Primary Phone number is busy or does not
answer, your Prestige will dial the Secondary Phone
number if available.
Some areas require dialing the pound sign # before the
phone number for local calls. A # symbol may be
included at the beginning of the phone numbers as
required.
Multiple Link Options:
Multiple Link The Prestige uses the PPP Multilink Protocol
(PPP/MP) to bundle multiple links in a single
connection to boost the effective throughput between
two nodes.
Off / BOD /
Always
Add Persist This parameter specifies the number of seconds where
traffic is above the adding threshold before the
Prestige will bring up the second link.
Default = 5
sec
Subtract Persist This parameter specifies the number of seconds where
traffic is below the subtraction threshold before your
Prestige drops the second link.
Default = 5
sec
