A SERVICE OF

logo

Prestige 201 ISDN Access Router
System Management 7-1
Chapter 7
Telnet Configuration and Capabilities
7.1 Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the console
port. Once your Prestige is configured, you can use telnet to configure it remotely as shown below.
Figure 7-1 Telnet Configuration on a TCP/IP Network
7.2 Telnet Under SUA
When Single User Account (SUA) is enabled and an inside server is specified, telnet connections from the
outside will be forwarded to the inside server. So to configure the Prestige via telnet from the outside, you
This chapter discusses using telnet to remotely configure your Prestige.