1-13
Cisco IE 2000 Switch Software Configuration Guide
OL-25866-01
Chapter 1 Configuration Overview
Default Settings After Initial Switch Configuration
• MSTP is disabled. For more information, see Chapter 21, “Configuring MSTP.”
• Optional spanning-tree features are disabled. For more information, see Chapter 22, “Configuring
Optional Spanning-Tree Features.”
• FlexLinks are not configured. For more information, see Chapter 24, “Configuring FlexLinks and
the MAC Address-Table Move Update.”
• DHCP snooping is disabled. The DHCP snooping information option is enabled. For more
information, see
Chapter 25, “Configuring DHCP.”
• IP source guard is disabled. For more information, see Chapter 25, “Configuring DHCP.”
• DHCP server port-based address allocation is disabled. For more information, see Chapter 25,
“Configuring DHCP.”
• Dynamic ARP inspection is disabled on all VLANs. For more information, see Chapter 26,
“Configuring Dynamic ARP Inspection.”
• IGMP snooping is enabled. No IGMP filters are applied. For more information, see Chapter 28,
“Configuring IGMP Snooping and MVR.”
• IGMP throttling setting is deny. For more information, see Chapter 28, “Configuring IGMP
Snooping and MVR.”
• The IGMP snooping querier feature is disabled. For more information, see Chapter 28, “Configuring
IGMP Snooping and MVR.”
• MVR is disabled. For more information, see Chapter 28, “Configuring IGMP Snooping and MVR.”
• Port-based traffic
–
Broadcast, multicast, and unicast storm control is disabled. For more information, see
Chapter 29, “Configuring Port-Based Traffic Control.”
–
No protected ports are defined. For more information, see Chapter 29, “Configuring Port-Based
Traffic Control.”
–
Unicast and multicast traffic flooding is not blocked. For more information, see Chapter 29,
“Configuring Port-Based Traffic Control.”
–
No secure ports are configured. For more information, see Chapter 29, “Configuring Port-Based
Traffic Control.”
• CDP is enabled. For more information, see Chapter 32, “Configuring CDP.”
• UDLD is disabled. For more information, see Chapter 33, “Configuring UDLD.”
• SPAN and RSPAN are disabled. For more information, see Chapter 30, “Configuring SPAN and
RSPAN.”
• RMON is disabled. For more information, see Chapter 34, “Configuring RMON.”
• Syslog messages are enabled and appear on the console. For more information, see Chapter 35,
“Configuring System Message Logging.”
• SNMP is enabled (Version 1). For more information, see Chapter 36, “Configuring SNMP.”
• No ACLs are configured. For more information, see Chapter 37, “Configuring Network Security
with ACLs.”
• QoS is disabled. For more information, see Chapter 38, “Configuring Standard QoS.”
• No EtherChannels are configured. For more information, see Chapter 40, “Configuring
EtherChannels.”
• IP unicast routing is disabled. For more information, see Chapter 41, “Configuring IP Unicast
Routing.”
