
6 C4614M (3/09)
RUNNING THE ENDURA MAPPING SERVER INSTALLATION PROGRAM
The installation process described below assumes that the system manager uses a specific password.
If the password for the system manager has been changed, contact a Pelco Product Support representative
to help you install the Endura Mapping server.
It is not necessary to shut down any services that might be running when installing the Endura Mapping
server on the system manager. Installing these services does not interfere with any activity on the Endura
network.
Do not install the Endura Mapping server on a system manager on which the service is currently installed.
1. Place the Endura Mapping resource disc in the CD or DVD drive of your computer.
2. Navigate to the Endura Mapping Server folder, and then double-click the server installation
executable file on the disc. The Endura Mapping software license agreement appears.
3. Accept the agreement, and then follow the prompts on the screen to install the server. A DOS
command window opens.
4. Review the messages in the window, and then press any key to continue.
5. When prompted for the IP address, type the IP address for the system manager that you located
earlier, and then click OK. The Endura Mapping server is installed on the system manager. Status
messages appear on the screen during the installation.
6. Repeat this procedure for the secondary system manager, using the IP address or name of the
secondary system manager in the command.
INSTALLING ENDURA MAPPING
Installing Endura Mapping on computers requires three steps: (1) registering the application at the Pelco
Web site, (2) preparing each computer for the installation, and (3) installing the application.
REGISTERING THE APPLICATION
You must provide a license key when installing Endura Mapping on an Endura Workstation or computer.
Toreceive a license key, you must register the application with Pelco. To do so, log on to the Pelco Web
site at www.pelco.com/activate, and follow the instructions at the site to enter the product registration so
that you can obtain the license key. The registration number is located on the package label and resembles
the number in Figure 2.
Figure 2. Application Registration Number