QGE 100 • Software Configuration and Control 26
Managing the QGE 100 List
You can perform the following tasks on the QGE 100 List:
Refreshing the list
After being closed and reopened or after list items have been added or removed, the
Administrator software does not automatically update the QGE 100 List. After making
changes to any of the items in the QGE 100 List or Configure QGE 100 Properties section,
do any of the following to display the latest information:
• Click the Refresh button in the Tasks section.
• From the Connection menu, select Discover QGE 100 devices.
• Press <F5> on your computer keyboard.
The list is redisplayed and all changed parameters are updated.
Saving the list
To save the list displayed in the QGE 100 List field as a file on your host computer:
1. From the Connection menu, select Save QGE 100 List. A Save As window opens.
2. In the File name field, enter a name for the list being saved. Do not enter a file
extension.
3. By default the Save As window opens to the following location on your computer:
C:\Program Files\Extron\QGE 100 Administrator.
If desired, browse to the folder where you want to save the list file.
4. Click OK. The list file is saved on your computer. The next time that the Administrator
is loaded, this file is loaded automatically.
NOTE: QGEs in the QGE 100 List remain after the list is refreshed, even if they have
been removed from the network or are not powered on at the time of the
refresh. QGEs that are no longer on the network appear grayed out and
cannot be selected for viewing.
Adding QGEs to the list
• Automatically: To automatically add any new QGEs that have been connected to
the network, click Refresh. The Administrator software searches the network and
displays all detected devices.
NOTE: Be sure to save the new list after a QGE 100 is added to it.
• Manually: To manually add individual QGEs to the list:
1. From the Connections menu, select Add QGE 100. The Add QGE 100 window
opens.
