A SERVICE OF

logo

Troubleshooting
Debug/Syslog Operation
Example. The next example shows how to configure:
Debug logging of ACL and IP-OSPF packet messages on a Syslog server
at 18.38.64.164 (with user as the default logging facility).
Display of these messages in the CLI session of your terminal device’s
management access to the switch.
Blocking Event Log messages from being sent from the switch to the
Syslog server and a CLI session.
To configure Syslog operation in these ways with the Debug/Syslog feature
disabled on the switch, you would enter the commands shown in Figure C-18.
C-48