Printing Menu Settings
Control Panel 2-11
Control Panel
Printing Menu Settings
The Printing menu provides access to configuration choices that directly affect how your
documents are printed. Figure 2-12 shows some of these.
If your software specifies different values than those programmed in the Control Panel, the
printer uses the values supplied with the printing job.
Figure 2-12 Printing Menu
When you see pointers on the screen pointing up or down, that indicates there are additional
selections available by using
į
or
Ĭ to access them.
In the table below, * indicates that a setting is present only if required option is installed (HCI,
HCO, PostScript). The equals sign (=) indicates the factory default value.
Copies
=1 (minimum)
32767 (maximum)
Sets the number of copies to be printed for each page.
Intray
=TRAY1
TRAY2
TRAY3
=HCI* (Default if HCI
is present
Sets the default media input source.
Paper
=auto
LETTER
LEGAL
LEDGER
EXECUTIVE
A4
A5
A3
JISB4
JISB5
CUSTOM
Sets the default image the page will be formatted for.
Auto uses the page size of the selected intray.
*Outbin
=UPPER
HCO-FACEDOWN
HCO-FACEUP
Sets the media output destination.
Online
Menu
Online
Printing
Configuration
PCL
Comms
Maintenance
