122 USING THE M208’S COMMAND SET: npsh Command Set
store pserver novell polltime [
time
]
Store the time (in seconds) between polling by the unit to see if print jobs are
in the queue on the file server. This is applicable to a PSERVER setup only.
The M208’s NET LED will flash according to this polltime.
store pserver smb workgrp
workgroupname
Store the M208’s workgroup name for Microsoft Networks (i.e. Windows for
Workgroups, Windows NT, and Windows 95). Microsoft Networks use these
names to organize groups of computers into workgroups so that when brows-
ing certain functions, users see only computers belonging to a particular
workgroup rather than all the computers on the network.
If no workgroupname has been specified, the default name is WORKGROUP
(note all capitals). This is a standard Windows default.
store tcpip
store tcpip
ifnum
addr
ipaddress
Store the ipaddress for the NIT module specified by ifnum.
ifnum will always be 1 for the M208 since there is only one network inter-
face, Ethernet.
store tcpip
ifnum
frametype [[-]] ethernet2] |
[[-]802.2snap]
Control the frame type(s) used by the NIT module specified by ifnum.
store tcpip
ifnum
mask
netmask
Store the netmask for the NIT module specified by ifnum.
store tcpip
ifnum
opts [[-]rarp] [[-]bootp]
Enable or disable the RARP and BOOTP for the NIT module specified by
ifnum.
Note
Note
Note
