
CONFIGURING THE M208 FOR NOVELL: Host Configuration 73
If you want to continue with any of the following procedures, please find them as indi-
cated in other sections of this manual:
• Add to or change configuration of your M208. Please see USING THE M208’S
COMMAND SET on page 93 and USING NPWIN on page 127.
• Utilize more advanced features of the M208. Please see USING THE M208’S
ADDITIONAL OPTIONS on page 131.
• Troubleshoot Novell installation and printing problems. Please see Novell
Problems on page 163.
21 Check the CURRENTLY
ATTACHED SERVERS once you
have gone into view the appropriate
queue.
You should see the M208’s name displayed
(e.g. M_000BF5).
22 Press <Escape> until you are out of
PCONSOLE.
You will be back at the command line and
the M208 is now configured.
Step Action Result of Action