A SERVICE OF

logo

5–40 IBM Network Color Printer Operator’s Guide
4. Clean the separation corona wire by moving the wire cleaner from side to
side several times.
5. After you clean the wire, put the wire cleaner back in its storage place and
close the top cover.
6. Close the front door.
7. Print a configuration page (see “Printing a Configuration Page” on page
4–9) and note the print count that it reports. Record this information on
your Supplies Replacement Log, shown in Appendix B.
You have finished replacing the photoconductor drum cartridge and the used
toner bottle and cleaning the separation corona wire. Turn on the printer
again.