4–17 IBM Network Color Printer Operator’s Guide
6. Press the Menu push button 3 times. You see EXIT SETUP on the first line
of the display panel and the default setting, NO, on the second line.
7. Press the down Menu Scrolling push button (↓) to see YES on the second
line.
8. Press the Enter push button. You see SAVE CHANGES on the first line of the
display panel and the default setting, YES, on the second line. Press the
Enter push button to save the changes.
Choosing to Print When There Is a PostScript Error
Use the following procedure to choose whether or not the printer prints the
available portion of a print job when there is a PostScript error.
1. Go to the Printer Setup menu (see “Accessing the Printer Setup Menu” on
page 4–14).
2. Use the Menu Scrolling push buttons (↑↓) to scroll through the items until
you see PRINT TO PSERROR on the second line of the display panel.
3. Press the Enter push button. PRINT TO PSERROR moves up to the first line
of the display panel and you see NO on the second line of the display panel.
4. Use the Menu Scrolling push buttons (↑↓) to scroll through the available
settings, YES and NO. Choose YES to print the portion of the job processed
before the error. Choose NO to cancel printing when there is a PostScript
error. NO is the default.
Notes:
1. If you have trouble printing a PostScript job, consider setting PRINT TO
PSERROR to YES. This allows you to see where the job stopped and
the PostScript error near the last page printed.
2. If you print large PostScript jobs, consider setting PRINT TO PSERROR
to NO. A large PostScript job might stop after 2/3 of the job is finished
and tie up the printer.
3. If you set both the PRINT TO PSERROR and the PRINT COVER PAGE
settings to YES, the PostScript error message is printed on the cover
page as the job status.
5. When you see the setting you want, press the Enter push button.
6. Press the Menu push button 3 times. You see EXIT SETUP on the first line
of the display panel and the default setting, NO, on the second line.
7. Press the down Menu Scrolling push button (↓) to see YES on the second
line.
8. Press the Enter push button. You see SAVE CHANGES on the first line of the
display panel and the default setting, YES, on the second line. Press the
Enter push button to save the changes.
