Table 24. Configuration Parameter List - Station Configuration for ATM (continued)
Parameter Information
Parameter
Forward Sustained Cell Rate
Valid Values
1 - 85% of line speed
Default Value
Port’s Default Effective Capacity/48
Description
This parameter indicates an upper bound on the average cell transmission rate. You
cannot specify this parameter for Best Effort connections.
Parameter
Forward Tagging
Valid Values
Yes, No
Default Value
Yes
Description
This parameter indicates that cells that are nonconforming to cell loss priority 0 traffic
specification but are conforming to cell loss priority 1 traffic specification are marked
and allowed into the ATM network. You cannot specify this parameter for Best Effort
connections.
Parameter
QoS
Valid Values
CLASS_0, CLASS_1, CLASS_2, CLASS_3, CLASS_4, where
CLASS_0
The unspecified class. The network does not specify any QoS.
CLASS_1
Performance is comparable to current digital private line performance.
CLASS_2
Intended for packetized video and audio in teleconferencing and multimedia
applications.
CLASS_3
Intended for interoperation of connection-oriented protocols, such as Frame Relay
CLASS_4
Intended for interoperation of connectionless protocols, such as IP.
Default Value
CLASS_0
Description
This parameter indicates which class of service is provided to an ATM virtual
connection. You cannot specify this parameter for Best Effort connections.
Note: The following parameters are backward traffic parameters.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 163
