5: Commands and Levels
EDS-MD Command Reference 101
Sets the Reply To address for email alerts.
<text> = email address to place in the Reply To field of the
email alert.
Sends an email using the current settings.
Sets the port used by the SMTP server.
<number> = port used for SMTP on the server side.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Displays email statistics.
Sets the Subject for email alerts.
<text> = text to placed as the subject.
Sets To addresses for email alerts.
<text> = a quoted, semicolon separated list of email addresses.
Stores the current configuration in permanent memory.
enable (enable) level commands
Show interface statistics
Continuously show thread runtime information
Enters the configuration level.
Show name and number for lines.
Begin session on serial port.
Enters the configure email level.
Enters the filesystem level.
Kills SSH session with index from "show sessions"
Kills Telnet session with index from "show sessions"
Enters the line level.
<line> = number of the line (serial port) to be configured.
Ping destination continuously with 5 second timeout
Ping destination n times with 5 second timeout
ping <host> <count> <timeout>
Ping destination n times with x timeout (in seconds)
Reload factory defaults to permanent storage
Displays the last 20 commands entered during the current CLI
session.
Show interface statistics
Show UDP/TCP state information
Show thread runtime information
Show active Telnet and SSH Sessions
Enters the SSH configuration level.
