5: Commands and Levels
EDS-MD Command Reference 231
Restores the default protocol as "TCP".
Restores the default 45 second connect mode TCP keep alive
timeout.
Exits to the next higher level.
Removes the remote host address used to establish tunneling
connections.
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Clears the RSA/DSA certificate selection.
Removes the remote port used to establish tunnel connections.
Removes the SSH user name.
Disables the connect mode TCP keep alive timeout.
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode
tunneling.
Uses Telnet protocol (with IAC) for connect mode tunneling.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode
tunneling.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI
session.
show connection statistics
Sets the SSH user name for use when establishing tunneling
connections
with other devices.
<text> = SSH user name.
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and sets
the timer.
<milliseconds> = timer value, in milliseconds.
validate certificate disable
Skips verification of the server certificate when connecting.
validate certificate enable
Requires verification of the server certificate when connecting.
Makes connections using the specified Address.
Makes connections using the VIP name.
Stores the current configuration in permanent memory.
host 4 (config-host:4) level commands
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the de-
fault value,
which depends on the selected protocol.
Exits to the configuration level.
Change to config host level
