5: Commands and Levels
EDS-MD Command Reference 333
Enters the line level.
<line> = number of the line (serial port) to be configured.
login connect menu disable
Disables the login connect menu, so a user will get the CLI im-
mediately
after logging in.
login connect menu enable
Enables the login connect menu, so a user will get the menu
rather than the
CLI immediately after logging in.
Removes the configured send break character.
Shows the layout of the connect menu with current settings.
Sets the optional send break character.
<text> = the character.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be confi-
gured.
Enters the configure-terminal level for the network.
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
gured.
Stores the current configuration in permanent memory.
trusted authorities (ssl-auth) level commands
Adds an Authority Certificate.
no intermediate authority <cert>
Removes an Intermediate Authority Certificate.
<cert> = index displayed by "show authority" command.
no trusted authority <cert>
Removes a Trusted Authority Certificate.
<cert> = index displayed by "show authority" command.
Displays Authority Certificate Information.
Displays the last 20 commands entered during the current CLI
session.
Stores the current configuration in permanent memory.
tunnel 1 (tunnel:1) level commands
Enters the accept level for this tunnel.
show connection statistics
Zeros all tunnel counters
Enters the connect level for this tunnel.
Enters the disconnect level for this tunnel.
Exits to the enable level.
Enters the line level.
<line> = number of the line (serial port) to be configured.
