5: Commands and Levels
EDS-MD Command Reference 328
Enters the configure-terminal level for the network.
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
gured.
Stores the current configuration in permanent memory.
terminal 4 (config-terminal:4) level commands
break duration <milliseconds>
Sets how long a break should last when it is being sent to the
line.
<milliseconds> = number of milliseconds.
Restores the break duration to the default value (500 ms).
Sets the default terminal type, "UNKNOWN".
Disables echoing of characters received on the line back to the
line.
Enables echoing of characters received on the line back to the
line.
Exits to the configuration level.
exit connect menu disable
On the login connect menu, removes the menu item allowing
the user to exit
to the CLI.
On the login connect menu, inserts the menu item allowing the
user to exit
to the CLI.
Enters the line level.
<line> = number of the line (serial port) to be configured.
login connect menu disable
Disables the login connect menu, so a user will get the CLI im-
mediately
after logging in.
login connect menu enable
Enables the login connect menu, so a user will get the menu
rather than the
CLI immediately after logging in.
Removes the configured send break character.
Shows the layout of the connect menu with current settings.
Sets the optional send break character.
<text> = the character.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be confi-
gured.
Enters the configure-terminal level for the network.
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
