5: Commands and Levels
EDS-MD Command Reference 324
Restores the default maximum allowed concurrent incoming
SSH sessions.
Restores the default local port to the SSH server.
Sets the maximum allowed concurrent incoming SSH sessions.
<number> = number of sessions.
Sets the local port that the SSH server uses.
<number> = local port number.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Displays the SSH server statistics.
Stores the current configuration in permanent memory.
Enters the SSL credentials configuration level.
Exits to the enable level.
Displays the last 20 commands entered during the current CLI
session.
Enters the SSL configuration level.
Stores the current configuration in permanent memory.
syslog (config-syslog) level commands
Restores the default syslog remote port.
default severity log level
Returns to the config level.
Sets the address of the syslog recipient.
<text> = IP address or name of the host.
Removes the address of the syslog recipient.
Sets the syslog remote port.
<number> = number of the remote port used when making a
syslog connection.
Log only Alert and more severe events.
severity log level critical
Log only Critical and more severe events.
severity log level emergency
Log only Emergency events.
Log only Error and more severe events.
severity log level information
Log only Information and more severe events.
severity log level notice
Log only Notice and more severe events.
severity log level warning
Log only Warning and more severe events.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Displays the syslog statistics.
