5: Commands and Levels
EDS-MD Command Reference 168
Displays the last 20 commands entered during the current CLI
session.
show connection statistics
Sets the SSH user name for use when establishing tunneling
connections
with other devices.
<text> = SSH user name.
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and sets
the timer.
<milliseconds> = timer value, in milliseconds.
validate certificate disable
Skips verification of the server certificate when connecting.
validate certificate enable
Requires verification of the server certificate when connecting.
Makes connections using the specified Address.
Makes connections using the VIP name.
Stores the current configuration in permanent memory.
host 14 (config-host:14) level commands
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the de-
fault value,
which depends on the selected protocol.
Exits to the configuration level.
Change to config host level
Sets the name of the host.
<text> = name of the host.
Clears the name of the host.
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when this
host is
selected on the login connect menu.
<text> = IP address.
Sets the remote port used to connect to the host.
<number> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Sets the username for logging into the host via SSH.
<text> = username.
Stores the current configuration in permanent memory.
host 15 (tunnel-connect-host:8:15) level commands
Sets the remote host to establish tunneling connections with.
<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16 bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punctua-
tion:
