A SERVICE OF

logo

A – Command Line Interface
Hardreset Command
A-34 59097-02 B
S
Hardreset Command
Resets the switch and performs a power-on self test. This reset disrupts traffic,
activates the pending firmware, and clears the alarm log. To save the alarm log
before resetting, refer to the ”Set Log Command” on page A-76.
Authority Admin session
Syntax hardreset
Notes To reset the switch without a power-on self test, refer to the ”Reset Command” on
page A-46.
To reset the switch without disrupting traffic, refer to the ”Hotreset Command” on
page A-37.