A – Command Line Interface
Zoning Command
A-138 59097-02 B
S
Zoning Command
Opens a Zoning Edit session in which to create and manage zone sets and zones.
Refer to the ”Zone Command” on page A-131 and the ”Zoneset Command” on
page A-135.
Authority Admin session except for the Active, History, Limits, and List keywords. The Clear
keyword also requires a zoning edit session.
Syntax zoning
active
cancel
clear
edit
history
limits
list
restore
save
Keywords active
Displays information for the active zone set including component zones and zone
members. This keyword does not require an Admin session.
cancel
Closes the current Zoning Edit session. Any unsaved changes are lost.
clear
Clears all inactive zone sets from the volatile edit copy of the zoning database.
This keyword requires a zoning edit session. This keyword does not affect the
non-volatile zoning database. However, if you enter the Zoning Clear command
followed by the Zoning Save command, the non-volatile zoning database will be
cleared from the switch.
edit
Opens a Zoning Edit session.
NOTE: The preferred method for clearing the zoning database from the switch
is the Reset Zoning command.
