A – Command Line Interface
Set Setup Command
59097-02 B A-85
A
EmbeddedGUIEnabled Enables (True) or disables (False) the SANsurfer Switch
Manager web applet. The web applet enables you to point
at a switch with an internet browser and run SANsurfer
Switch Manager through the browser. This parameter is
the master control for the Set Setup System command
parameter, EmbeddedGUIEnabled. The default is True.
SNMPEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use the Simple
Network Management Protocol (SNMP). This parameter is
the master control for the Set Setup SNMP command
parameter, SNMPEnabled. The default is True.
NTPEnabled Enables (True) or disables (False) the Network Time Proto-
col (NTP) which allows the synchronizing of switch and
workstation dates and times with an NTP server. This helps
to prevent invalid SSL certificates and timestamp confusion
in the event log. The default is False. This parameter is the
master control for the Set Setup System command param-
eter, NTPClientEnabled.
The default is False.
CIMEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use the Com-
mon Information Model (CIM). The default is True.
FTPEnabled Enables (True) or disables (False) the File Transfer Proto-
col (FTP) for transferring files rapidly between the worksta-
tion and the switch. The default is True.
MgmtServerEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use GS-3 Man-
agement Server (MS). This parameter is the master control
for the Set Config Port command parameter, MSEnable.
The default is False.
Table A-24. Switch Services Settings (Continued)
Entry Description
