B – Command Line Interface
Show Command
59043-01 A B-49
slot [slot_number]
Displays the hardware attributes for the slot on a SANbox2-64 switch given by
[slot_number]. [slot_number] can be 0–10. If you omit [slot_number], the
hardware configuration for all slots is displayed.
steering [domain_id]
Displays the routes that data takes to the switch given by [domain_id]. If you omit
[domain_id], the system displays routes for all switches in the fabric.
support
Executes a series of commands that display a complete description of the switch,
its configuration, and operation. The display can be captured from the screen and
used for diagnosing problems. This keyword is intended for use at the request of
your authorized maintenance provider. The commands that are executed include
the following:
■ Date
■ Alias List
■ Config List
■ Date
■ History
■ Ps
■ Show (About, Alarm, Backtrace, Chassis, Config Port, Config Switch, Dev,
Dev Settings, Domains, Donor, Fabric, Log, Log Settings, Lsdb, Mem, Ns,
Perf, Port, Setup Mfg, Setup Snmp, Setup System, Steering, Switch,
Topology, Users)
■ Uptime
■ User Accounts
■ Whoami
■ Zoneset (Active, List)
■ Zoning (History, Limits, List)
switch
Displays switch operational information.
topology
Displays all connected devices.
users
Displays a list of logged-in users. This is equivalent to the User List command.
version
Displays an introductory set of information about operational attributes of the
switch. This keyword is equivalent to the About keyword.
