A SERVICE OF

logo

6 Removal/Replacement
Fans
59043-01 A 6-19
6.6.2
Installing a Fan
To install a fan, do the following:
1. Confirm that the new fan has the same air flow direction as the old fan. Each
fan has a label indicating the air flow direction.
2. Slide the fan into the bay until it is firmly seated and fasten the screws. A fan
will fit in any bay.
3. Confirm the fan status. Do one of the following:
Open a Telnet session and enter the Show Chassis command to
display the operational status of the fans. Refer to the Show
Command on page B-44.
Observe the fan status in the Switch data window of the SANbox
Manager topology display. Refer to the SANbox2-64 Switch
Management Users Guide.