xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
172
DGS–3426:5#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Enabled
Multicast router Only : Enabled
VLAN Name : default
Query Interval : 40
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 5
Host Timeout : 90
Router Timeout : 90
Leave Timer : 10
Querier State : Enabled
Querier Router Behavior : Querier
State : Enabled
Fast Leave : Enabled
Report Suppression : Disabled
Receive Query Count : 2220
Send Query Count : 2445
Version : 3
Total Entries: 1
DGS–3426:5#
show router_ports
Purpose Used to display the currently configured router ports on the Switch.
Syntax
show router_ports [vlan <vlan_name 32>} {[static | dynamic | forbidden]}
Description This command is used to display the router ports currently configured on the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN on which the router port resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically configured.
forbidden – Displays ports that are forbidden from becoming router ports.
Restrictions None.
Example usage:
To display the router ports.
DGS–3426:5#show router_ports
Command: show router_ports
VLAN Name : default
Static router port :
Dynamic router port : 3:2
Forbidden router port :
DGS–3426:5#
