xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
319
Command Parameters
show jwac auth_state ports
<portlist>
show jwac ports
<portlist>
config jwac auth_failover [enable | disable]
config jwac authorization network {radius [enable| disable]| local [enable| disable]} (1)
config jwac authenticate_page < japanese| english >
show jwac authenticate_page
element
config jwac authentication_page
element
[japanese|english] [default|page_title <desc 128>|login_window_title <desc
32>|user_name_title <desc 16>|password_title <desc 16>|
logout_window_title <desc 32>]
Each command is listed, in detail, in the following sections.
enable jwac
Purpose Used to enable the JWAC function.
Syntax
enable jwac
Description JWAC and WAC are mutually exclusive functions. They cannot be enabled
simultaneously. When the JWAC function is used, PC users/end–users need to pass two
stages of authentication. The first stage is to authenticate with the quarantine server and
the second stage is to authenticate with the switch. For the second stage, the
authentication is similar to WAC, except that there is no port VLAN membership change
by JWAC after a host passes authentication. The RADIUS server will share the server's
configuration defined by the 802.1X command set.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the JWAC function on the Switch:
DGS–3426:5#enable jwac
Command: enable jwac
Success.
DGS–3426:5#
disable jwac
Purpose Used to disable the JWAC function.
Syntax
disable jwac
Description This command is used to disable JWAC.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the JWAC function on the Switch:
