A SERVICE OF

logo

xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
69
DGS–3426:5#show error ports 1:3
Command: show error ports 1:3
Port number : 1:3
RX Frames TX Frames
--------- ---------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
Symbol Error 0
Buffer Full Drop 0
ACL Drop 0
Multicast Drop 0
VLAN Ingress Drop 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization
Purpose Used to display real–time port and CPU utilization statistics.
Syntax
show utilization [ports | cpu]
Description This command will display the real–time port and cpu utilization statistics for the Switch.
Parameters ports – Entering this parameter will display the current port utilization of the Switch.
cpu – Entering this parameter will display the current CPU utilization of the Switch.
Restrictions None.
Example usage:
To display the port utilization statistics: