Releasing a Job Storage print job
After you send a print job that uses the Job Storage feature, you can release the job to print
from the product control panel.
1 Press the select button (the one with the check mark) to open the menus. RETRIEVE JOB
is highlighted.
2 Press the select button.
3 Press the up and down buttons to scroll to your User Name, and then press the select button.
4 Press the up and down buttons to scroll to the Job Name, and then press the select button.
PRINT JOB is highlighted.
5 Press the select button.
6 If a PIN number is assigned to the job, press the up and down buttons to select the first digit
of the PIN, and then press the select button. The number in the product control-panel
display changes to an asterisk. Repeat this step for each of the remaining three digits of the
PIN number.
If no PIN number is assigned to the job, continue with step 7.
7 Press the up and down buttons to select the number of copies to print.
8 Press the select button to print the job.
Deleting a Job Storage print job
Sometimes it is necessary to delete a print job from the product hard disk. You can do this from
the product control panel.
1 Press the select button (the one with the check mark) to open the menus. RETRIEVE JOB
is highlighted.
2 Press the select button.
3 Press the up and down buttons to scroll to your User Name, and then press the select button.
4 Press the up and down buttons to scroll to the Job Name, and then press the select button.
5 Press the up and down buttons to select Delete.
6 If a PIN number is assigned to the job, press the up and down buttons to select the first digit
of the PIN, and then press the select button. The number in the product control-panel
display changes to an asterisk. Repeat this step for each of the remaining three digits of the
PIN number.
If no PIN number is assigned to the job, continue with step 7.
7 Press the select button to delete the job.
The stored print job is deleted and the product returns to the READY state.
112 Job Storage tab features EN
