The default setting is Unspecified, and the program selects the media type. If you select a
different setting, make sure the correct media type is loaded in the tray you selected in the
Source is: setting. For more information about media types, see the
Media attributes section of
this guide.
Use different paper
You can print books with different media types using the Use different paper options.
● First Page
● Other Pages
● Back Cover
Each option for the Use different paper setting is described in the following sections, in the
order they appear in the pane below the Use different paper check box.
First Page
Figure 4-5. First Page options
The First Page options are as follows:
● Size is: drop-down menu
● Source is: drop-down menu
● Type is: drop-down menu
The Size is: driver setting for the first page applies to the entire print job. When this is set,
the setting becomes unavailable for all the other Use different paper options.
The Source is: setting specifies the source tray to use for printing a document. The list of
source trays depends on the printer accessories. Any optional media trays that are installed
through the Device Settings tab also appear here. For more information about the Source
is: setting, see the
Source Is section of this chapter.
EN Chapter 4 HP PCL 6, HP PCL 5c, and HP PS 3 emulation unidrivers for Windows 167
