TallyGenicom Intelliprint 8008N Color Laser Printer User Guide
5-12
Each time the printer is powered on, if the StartupMode parameter is set to 1,
either or both the optional storage devices will be searched for a file called Sys/
Start, a file named Start in a path called Sys. If this file is found, it will be read
and parsed by the PostScript interpreter. Again, it is up to the PostScript
programmer to create the content of this file and get the file onto the storage
device using the PostScript device and file operators.
5.3.2 Using the Power-On Files Feature
Power-on Files Defined
If a FLASH DIMM or hard disk drive is installed in your printer, your printer
has the capability of storing additional power-on files which can be read and
interpreted at power-on. Power-on files are processed at power-on initialization
only and not at the start of every print.
Power-on files can contain either PCL or PostScript language content.
Examples of power-on files include soft fonts, and macro/overlay definitions.
The FLASH DIMM can store approximately 16 MB of file storage, the hard
disk drive storage depends on the size of the drive that is installed in your
printer.
Optional operator panel menu selections become available when either of
these options are installed and power-on files are detected.
