A SERVICE OF

logo

Chapter 4 Control Panel Functions
4-9
4.6.1 Job Library Errors
When a Job Library error occurs, the following message will be displayed:
JOBLIB Error XX
Press Start
This is a continuable-fault, which means the START key must be pressed to
allow operations to continue. If the current job is aborted as a result of the
error, the message"Canceling Job" may be displayed after START is pressed.
"XX" in the error display above is an error code. The error codes for this
message are:
z 01 – Data stream was missing a Job Name specification. (Job will be
aborted.)
z 02 – Data stream was missing a User Name specification. (Job will be
aborted.)
z 03 – Data stream was missing a PIN specification. (Job will be aborted.)
z 04 – Attempted to overwrite a PRIVATE job, but PIN did not match. (Job
will be aborted.)
z 05 – Insufficient storage. (Job will be aborted only if it is a PRIVATE job.)
Delete
Job1
1. Press NEXT or PREVIOUS to scroll
through the Print Job Names.
2. Press SELECT to choose the
desired Print Job to Delete.
Job Name
PIN
This step is necessary if
the job is a PRIVATE job.
1. Press NEXT or PREVIOUS to
increase or decrease each digit of
the four-digit number.
2. Press SELECT to set one digit and
move to the next digit.
3. Press SELECT after changing the
last digit to save this setting.
Submenu Default Setting Available Settings Procedure for Changing Setting