Chapter3:OperatingYourVCR Recording(cont.)
bImportant:
Recap screen
_P_osram "_!J r e_6_ _!_;.....
CH DAY ON OFF
2 MOI7 ll:30a I:30PSP
_i0 TH20 9:00pIO:OOpEP
...... : : SP
: : SP
_]m.AD3UST 1;oselec1;
_nENU _1;6_s6_back Hi
e . i_-=ENTER_ 7;o _en1;er, _.
0 Channel 2
ODay Monday 17
0 S_art _ime ii :30am
<_ ST, Op 1;ime i : 3_)Pm
-),<-
',,I[@_D, TADJUST ,1_o_ selecz
_MENU 1;o"s6_aCk
® • _-ENTER 1;o en1;er
autospeedprogramming
Use auto speed programming if you want to record as much of the
program as possible in standard play (SP) speed, but you want
the VCR to automatically switch to extended play (EP) if there is
not enough tape left;.
Auto speed programming is only available in one programming
slot. In the first slot., the recording speed is automatically set to
AUTO. If you want to use auto speed programming in this pro-
gramming slot, you don't need to change ;anything.
Make sure that the "Tape" video function r_.atches the ldnd of
tape you are using. (See "Selecting and adjusting the audio and
video functions" on page 34.)
Set the time for recording to end a minute or two beyond the
program's scheduled broadcast time to avoid discrepancies
between the VCR's clock and the broadcast station's clock.
programmingTVprogramsthatendonthedayafter
If you want to start the recording at 11:00 I'M and end it at 2:00
AM the next day, simply set the start time Lo11:00 PM on the
recording start day and the end time to 2:00 AM. There :isno need
to change the day of the week.
skippingprograms
If you have already entered a program into your VCR's memory,
you can skip the program without going into the VCR's menus.
Simply press the POWER button on the front panel once. The
programmed recording light will turn off, and the program will be
skipped. If you decide not to skip the program, press the POWER
button on the front panel tvrice; the programmed recording light
will light up again.
changingprogrammedrecordingsettings
If you want to change the programmed recording settings:
O Press the MENU button on the remote control. Your VCR
will turn on and the '_VCR Main Menu" will appear.
Press the ADJUST buttons to select "Program to record."
Press the ENTER button. You'll see th_ "recap" screen.
Press the ADJUST buttons to place the cursor next 1;othe
program you wish to change. Press the ENTER button. You
will see the "Program to record" menu.
Repeatedly press the ENTER button to select the item you
wish to change. Use the ADJUST buttons to change it.
44
