26
GLP Once After Tare
When the GLP Tare function is set ON, allows the balance to output the GLP selections once after tare when the
weight value is printed to the printer. OFF is the default setting. The following example is with GLP Once After
Tare.
Reference
When the Reference function is set ON, prints the value of weight used as a reference in either Percent and Parts
Counting modes. OFF is the default setting.
Lock
Lock ON/OFF can only be changed when the hardware Lock Switch is set OFF/unlocked. A menu is locked when
the menu lock is set ON and the Lock Switch is ON. Lock when selected and turned on, locks all of the entries
made under the Print menu. In the locked condition, items may be looked at but not changed in the menu. When
set off, entries may be changed. OFF is the default setting.
12/01/97 12:01:37 AM
429.5 g
12/01/97 12:01:52 AM
Bal Id
429.8 g
12/01/97 12:02:17 AM
Bal Id
USER NO 1000001
429.8 g
12/01/97 12:02:43 AM
Bal Id
USER NO 1000001
PROJ NO 2000002
429.5 g
12/01/97 12:02:43 AM
Bal Id
USER NO 1000001
PROJ NO 2000002
Name . . . . . . . . .. . . . . .
429.5 g
4.5 Print (Cont.)
GLP Continuously
When the GLP Continuously function is set ON, allows the balance to output the GLP selections each time a
weight value is printed to the printer. OFF is the default setting. The following example is with GLP Cont On.
Time = On
Time = On
Balance ID = On
Time = On
Bal ID = On
User No. = On
Time = On
Bal ID = On
User No = On
Proj No = On
Time = On
Bal ID = On
User No = On
Proj No =
Name = On
Sample Printout
GLP Set Menu
Options Turned On
12/01/97 12:01:37 AM
429.5 g
429.6 g
429.7 g
429.7 g
429.7 g
Time = On
GLP Set Menu
Options Turned On
