29
Mode
Units
Setup Print
Enter
4.8 Mode
The Mode submenu permits the selection of five modes which can be turned ON or OFF. These modes are:
Weigh, Percent, Count, Animal and Lock. Weigh is turned ON and all others have a default setting of OFF.
When any of the modes are turned ON, they can be selected for operation from the Mode button.
Procedure
• Press the Setup button, CAL is displayed.
• Press
or button until MODE is displayed.
• Press Enter button to save setting.
• Press or button until either WEIGH, PER-
CENT, COUNT, ANIMAL, LOCK or EXIT is dis-
played.
• Press Enter button to save setting.
• Press or button and select either ON or
OFF.
• Press Enter button to save setting.
Weigh
The Weigh submenu is always set to ON as a default.
Percent
Percent weighing permits you to place a reference load on the balance, then view other loads as a percentage of
the reference. Selection is made using the Mode button. The default setting is OFF.
Count
Counting is used when counting quanties of parts. Selection is made using the Mode button. The default setting
is OFF.
Animal
Animal weighing provides special settings to accommodate animal movements. Selection is made using the
Mode button. The default setting is OFF.
Lock
Lock ON/OFF can only be changed when the hardware Lock Switch is set OFF/disabled. A menu is locked when
the menu lock is set ON and the Lock Switch is ON. Lock when selected and turned on, locks all of the entries
made under the Mode menu. In the locked condition, items may be looked at but not changed in the menu. When
set off, entries may be changed. OFF is the default setting.
Setup
Use keys to change, press Enter
Change
