Panasonic WJ-HD616K Manual

A SERVICE OF

next previous

105

Configurethesettingsrelatingtonetworktransmission[Transmission]

Select the [Transmission] tab on the "Network" page. (+ Page 60)

The settings relating to the resolution and rate to transmit live images to a PC via a network can also be configured on this tab.

[Livevideoresolution]

Select the resolution for live images from the following.

REC resolution: Live images are transmitted with the

resolution applied at the time of recording.

QVGA: Live images are transmitted in the QVGA size.

Default: REC resolution:

[Livevideorate(recresolution)]

Select the image transmission rate of live images (activated

when recording is not performed) when "REC resolution" is

selected for "Live video resolution". During recording, record-

ing rate is activated for live image transmission.

Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for

HD716K)

Default: 7.5ips

[Livevideoquality(recresolution)]

Select the image quality of live images (activated when

recording is not performed) when "REC resolution" is select-

ed for "Live video resolution". During recording, recording

image quality is activated for live image transmission.

XF(ExtraFine): Extra quality

SF (Super Fine): Super high quality

FQ (Fine): High quality

NQ (Normal): Standard quality

EX(Extended): Low quality (for long recording)

Default: FQ

[Livevideorate(QVGA)]

Select the transmission bit rate when "QVGA" is selected for

"Live video resolution".

128Kbps/192Kbps/256Kbps/384Kbps*/512Kbps*

* Only for HD716K

Default: 256Kbps

[Bandwidthcontrol]

Select the maximum transmission rate for data to be trans-

mitted from the following.

Unlimited/512Kbps/1 024Kbps/2Mbps/3Mbps/5Mbps/

8Mbps

Default: Unlimited

Note:

 • Regardlessofthesettingfor"Livevideoresolution",

when images are displayed on a multiscreen (4-split/

9-split/16-split screen) or with the sequential display,

"QVGA" is activated for resolution, and the setting for

"Live video rate (QVGA)" is activated when image is

transmitted.

 • Whenimageisdisplayedonasinglescreen,thesetting

for "Live video resolution" is activated when image is

transmitted.

 • Thesettingsfor"Livevideorate(recresolution)","Live

video quality(rec resolution)" and "Live video rate(QVGA)"

are applied to each screen segment.

Example: When "128Kbps" is selected for "Live video

rate (QVGA)" while images are being displayed on a

4-split screen, the whole transmission rate is

512 Kbps.

 • Selectthesettingfor"Bandwidthcontrol"sothatthe

value is greater than the total rate required for network

transmission. When the setting value is less than the

total transmission rate, image data may be destroyed

during transmission.

Example: When "QVGA" is selected for "Live video res-

olution" and "128Kbps" is selected for "Live video

rate (QVGA)" while 4 PCs displaying a single screen

are accessing the recorder simultaneously, select the

value greater than "512Kbps" for "Bandwidth con-

trol".

When "REC resolution" is selected for "Live video resolu-

tion", it is recommended to set "Unlimited" for

"Bandwidth control" to prevent the images from destruc-

tion due to change in transmission rate caused by the

recording setting. When images are destroyed even

when "Unlimited" is selected for "Bandwidth control",

select a lower value for image quality or recording rate.