Majoroperatingcontrolsandtheirfunctions
■ Front view
q Status indicator
ERROR: Blinks when an error that can become a prob-
lem for the recorder to run the system occurs.
Blinks red: System error
Blinks orange: Thermal error, cooling fan malfunc-
tion, etc.
ALARM: Blinks when an alarm occurs, and lights when
the alarm output stops. The blinking or lighting indi-
cator will go off when the alarm reset button is
pressed.
ALARM SUSPEND: Lights when the alarm suspension
mode is selected. (+ Operating Instructions (PDF))
TIMER: Lights when the schedule recording is set, and
blinks while the schedule recording is being per-
formed.
OPERATE: Lights when the power is on.
wAlarmresetbutton[ALARMRESET]
Press this button to reset the alarm.
e Camera selection button
Press the desired camera selection button to display
images from the respective camera. The camera selec-
tion button also indicates the status of the camera as
follows.
Lights green: Indicates the camera channel from
which images are currently being displayed on
the monitor.
Lights orange: Indicates the camera channel from
which images are being recorded.
rRecording/Playbackoperationbutton
[■ STOP] button: Press this button to stop playback.
[B PLAY h PAUSE] button: Press this button to start
playback.
Playback will be paused by pressing this button dur-
ing playback.
Lights green: During playback
Blinks green: During pause
[● REC] button: Starts manual recording
Recording will be stopped by holding down this but-
ton (for more than 2 seconds) during manual record-
ing.
Lights orange: During recording
tJogdial(inside)/Shuttlering(outside)
Jog dial: The following functions are provided.
Frame by frame playback can be performed during
pausing.
Skip can be performed during playback.
Shuttle ring: The following functions are provided.
Fast forward/reverse playback can be performed during
playback.
yHoldbutton[HOLD]
Press this button during fast forward/reverse playback
started by the shuttle ring to hold the current playback
speed (hold playback speed function).
Blinks green: During hold playback
In addition, press this button to perform panning/tilting
operation of cameras.
Lights green: During low-speed panning/tilting control
