A SERVICE OF

logo

21
How to detach the front cover
Step 1
(When detaching the front cover while the power is on)
Hold down the [ALARM RESET] button and the [MONITOR]
button (for more than 2 seconds).
The power of the front cover will be turned off.
Step 2
Open the maintenance port cover and the DVD drive cover,
and then remove the fixing screws (x3).
Step 3
Pull the right side of the front cover first, and then detach the
front cover.
Step 4
Disconnect the connection cable of the front cover.
• Detachthecablesfromthecableclamponthefront
cover.
• Disconnectthecablewhileholdingdownthetabofthe
connector.
DVD drive cover
Maintenance port cover
(Pull up the bottom side
of cover.)
Connection
cable
Connector
Cable clamp
Note:
• Beforedisconnectingthecable,besuretoturnoffthe
power of front cover.
How to attach the front cover
Step 1
Connect the connection cable of the front cover.
When connecting the connection cable, twist the connection
cable around the tab of the cable clamp.
(+ Reference illustration for step 4 of "How to detach the
front cover")
Step 2
Put the tab (on the left of the front cover) into the hole, and
then attach the front cover.
Step 3
Fasten the detached screws (x3), and then close the cover.
Step 4
(When attaching the front cover while the power is on)
Press the [ALARM RESET] button.
The power of the front cover will be turned on.
Tab
Hole