Panasonic WJ-HD616K Manual

A SERVICE OF

next previous

28

Rack mounting

Install the recorder in an EIA standard rack.

Equivalent to EIA standard rack (not manufactured by Panasonic): EIA 19-inch rack type (Depth: 550 mm or more)

Note:

 • UsefourM5x12screws(locallyprocured)toinstalltherecorderinarack.

Step 1

Remove the five rubber feet from the bottom of the recorder

using a flathead screwdriver.

Use a screwdriver to remove the screws holding the rubber

feet.

Step 2

Attach the rack handles to the rack mount brackets.

Fix them firmly using the screws for the rack handle (x4) and

the washers (x4).

Step 3

Place the rack mount brackets on both sides of the recorder.

Fix them firmly with the rack mount bracket fixing screws

(x6).

Step 4

Install the recorder in the rack.

Fix them firmly using the rack mount screws.

Important:

 • Keepthetemperatureintherackbelow+45°C

{+113 °F}.

 • Itisrecommendedtoinstallcoolingfansorequivalents

to keep the temperature in the rack below +30 °C

{+86 °F}.

 • Wheninstallingtherecorderintherack,makeaspaceof

1U (44 mm {1-23/32"}) above and below the recorder

for ventilation.

 • Donotblocktheventilationopeningsorslotstoprevent

the recorder from overheating.

Remove the rubber feet.

Rack handle

Washer

Washer

Screw for rack handle

Rack mount bracket

Rack handle

Rack handle

Screw for rack mount bracket (provided)

Rack mount bracket (provided)

Rack mount screws

M5 x 12 (locally procured)