R
Page 14
November 5, 2010
Cumberland Gap Wood Stove
7006-188G
Cut end to the front
Straight end to the back
Ceramic Blanket
Slanted corner
Manifold
chamber
REQUIRED ON ALL HORIZONTAL INSTALLATIONS
1. Open both doors.
2. Hold the diverter in a vertical position with the straight
edge going in fi rst and then rotate it to the inside of the
fi rebox as you slide the bent diverter over the ceramic
blanket . Figure 14.1.
3. Place in position as shown in Figure 14.2 below. The
front edge of the diverter will rest on the front edge of
the manifold chamber in a fl ush position. The back
edge will butt up against the back slanted corner.
4. Repeat for other side.
D. Baffl e Diverter
Baffl e Diverter:
• Packed inside the fi rebox
• Shipped fl at from the factory.
• Use the template on page 15 to bend the baffl e diverter
into the proper position.
WARNING
Fire Risk.
Required on all rear horizontal installations.
Excessive smoke or fl ame spillage into the
room may occur.
Figure 14.1
Figure 14.2