12
English
4. SET UP
• Assemble each part correctly.
Wrong assembly might cause
an accident.
• If you cannot do the assembling
yourself, consult the shop
where you bought this product.
■ ATTACHING THE SHOULDER
STRAP
1. Pass the ring of the shoulder strap
through the hook(A) and fix it by
the bolt securely.
2. Set the hook(B) of each shoulder
strap to the D-rings on the frame.
(A) UPPER SIDE
(B) LOWER SIDE
(1) Hook (A)
(2) Bolt
(3) D-ring
(4) Hook (B)
■ CONNECTING THE FLEXIBLE
SHAFT
1. Remove the clamping bolt
(M5xL10) in the center of the end
of the joint, and loosen the
fastening bolt (M5xL10) and the
screw (M5xL18) for mounting the
throttle lever.
2. Insert the main pipe into the joint
while turning it clockwise and
counterclockwise slightly.
3. Align the safety-lock hole of the
joint with the hole of the main pipe,
screw the clamping bolt and fasten
it tightly.
4. Tighten the fastening bolt of the
joint, and fix the main pipe firmly.
[Tightening torque]
4.9 to 7.8 N-m (0.5~0.8 kg-m)
5. Screw the throttle-lever mounting
screw, and fasten it tightly.
(1) Screw (M5xL18)
(2) Clamping bolt (M5xL10)
(3) Safety-lock hole
(4) Main pipe
(5) Throttle lever
(6) Joint
(7) Clamping bolt (M5xL10)
